Dear Ed,
That's not what I said, and you know it... (01)
It does not follow from success having been achieved that there are not
further opportunities for investment. (02)
In particular, ISO 15926 was developed using a previous generation of
languages and technology and we should look at how to move it forward. Not
that this stops it being used - it was designed to be as independent of the
implementation technology as possible. (03)
My priorities would be: (04)
1. Improve the RDL. There is a lot that is useful there, but also a lot of
crud that has crept in - and that is where the pesky details belong. There
are also areas where it could usefully be extended. The advantage of work in
this area is that there are no obvious technical barriers (but there do seem
to be political ones). There are quick wins here. (05)
2. I would encourage development of OWL versions of ISO 15926, but in
particular, improvements to OWL that would make it better suited to the
expressiveness of ISO 15926, and for data integration as well as reasoning. (06)
3. I would encourage the development of the IRING architecture and
implementations of it. In particular I would be looking for Quad store
technology. ISO 15926 is naturally quad based - a triple plus an identifier
for the triple. (07)
Whereas much of the costs of moving engineering data through the plant
lifecycle have been removed, there is still plenty of opportunity to improve
collaboration through the supply chain, and reduce project development times
(which can be worth $1m/day for larger projects). (08)
Specifically, I would be looking for equipment manufacturers to be
publishing data sheets as ISO 15926 linked data, as well as IRING
implementations to help with collaboration between owners and contractors in
developing requirements, and reviewing designs. (09)
And no, I don't think there is a need to standardise how a tool can
implement a conforming exchange for point to point exchanges. I think that
is a tactical matter. I'm not even sure you need that for IRING. What you do
need is an understanding of how to map data from various tools to ISO 15926,
and out again, but I don't see how it is appropriate to standardise how that
mapping is done since that would be specific to each particular tool. (010)
Regards (011)
Matthew West
Information Junction
Mobile: +44 750 3385279
Skype: dr.matthew.west
matthew.west@xxxxxxxxxxxxxxxxxxxxxxxxx
http://www.informationjunction.co.uk/
https://www.matthew-west.org.uk/
This email originates from Information Junction Ltd. Registered in England
and Wales No. 6632177.
Registered office: 8 Ennismore Close, Letchworth Garden City, Hertfordshire,
SG6 2SU. (012)
-----Original Message-----
From: ontology-summit-bounces@xxxxxxxxxxxxxxxx
[mailto:ontology-summit-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Barkmeyer,
Edward J
Sent: 27 January 2014 19:09
To: Ontology Summit 2014 discussion
Subject: Re: [ontology-summit] The tools are not the problem (yet) (013)
Matthew, (014)
OK. 15926 is highly successful, and there is no need for further
development of access mechanisms, templates, OWL mappings or any of that
stuff, because the useful stuff is already in wide use in industry. So NIST
and the USA need not invest further effort in the standards work on 15926,
except in the development of useful 'reference data libraries', i.e.,
'reference ontologies for process plants'. How a plant design tool can
implement a conforming exchange using one of those ontologies is already
standardized and widely implemented, right? (015)
That is, after 10 years, we have standardized everything we need except all
those pesky details that are actually used in designing and building and
operating a process plant. (016)
-Ed (017)
> -----Original Message-----
> From: ontology-summit-bounces@xxxxxxxxxxxxxxxx [mailto:ontology-
> summit-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Matthew West
> Sent: Sunday, January 26, 2014 1:22 AM
> To: 'Ontology Summit 2014 discussion'
> Subject: Re: [ontology-summit] The tools are not the problem (yet)
>
> Dear Ed,
> You are indeed rather late to the party.
>
> [EJB] I don't think I have seen an industry "success story" about
> 15926, even for 'peer-to-peer application interfacing'.
>
> MW: You certainly won't find them if you do not look. How about:
> https://d2024367-a-62cb3a1a-s-
> sites.googlegroups.com/site/drmatthewwest/publ
> ications/STEPintoTheRealWorld.PDF?attachauth=ANoY7crKMLjBQ-
> ztRwf87sQKcy0Tsxz
> 9GcjcUquJFQl3U-
> r3rlNRPZQq6NCgA0Xr_yq_IXMo_oG144m4jaJXdYuLOD3q5UsI6CD_YXI8Noh
> 7We_KilyxzWEwDN9iz0EKYkoIqr_WqVQDjSfzsw3eqgVlf4I81kawZoORdXC0W
> 0dYNWB2n2w0qdF
> PI7i_H6gurmjCiOQ7Rm4VDDdx-
> Zdw8kcEhEpuJBojpSZOV_Tn8_jGeMnts83DxVZpnhk4vWQyGDA
> cSHR8z1ms&attredirects=0
> as just one (pre-standardisation) example of delivering benefits.
> There are hundreds of other projects that have used ISO 15926 at
> different stages of development in different ways delivering hundreds
> of millions of dollars of benefits.
>
> But if that has been successful on a useful scale, there is no need
> for further work on anything but the scope of the reference ontology,
> because the peer-to-peer interfaces now exist. The fact is that they
> don't. There are no standards for them to implement. (Actually, ISO
> 15926-11 is a pretty good standard. It provides a very accessible
> ontology for the concepts in ISO 15288 (systems engineering for
> <something>), and a clear mapping from the ontology to an RDF exchange
> form for a model population. The a posteriori Part 4/Part 2 stuff is an
Annex in the back, if anyone cares.
> That is the kind of compromise that 15926 needs more of. And I think
> David Price and gang will do something similar in Part 12.)
>
> MW: Actually, I think the mistake is thinking that it is the interface
> standards that are needed. Getting data out of one system and into
> another has never been that big a deal in my experience. Pretty much
> any system has an import mechanism with a plain text format, and
> pretty much any system has a reporting system that can create a file to
more or less arbitrary layout.
> Job done. If there are problems, they are easily sorted out using
> tools like access and spreadsheets. It helps that most data waterfalls
> through a series of systems in the process industries, rather than
> there being tight integration with a lot of back and forth in real
> time. Those requirements have not surprisingly found themselves in
integrated systems.
>
> MW: Indeed the BIG IDEA in ISO 15926 was having a generic data model
> that enables you to say all the sorts of things that are important,
> and an extensible reference data library that provides the specifics
> to the level of detail required, and to which you can add anything you
> need for new domains plus templates that incorporate those specifics.
>
> MW: The big issue in integration and exchange between systems was not
> the exchange format, but the mapping between the different codes and
> names different systems used for the same things. The real achievement
> of ISO
> 15926 is indeed the RDL. As far as I know, by now all the major design
> packages for the process industries support the use of an RDL,
> including tailoring and extensibility. The oil majors at least that I
> have had contact with spend time developing their own RDLs, these
> being extended subsets of the ISO 15926 RDL, which they require to be
> deployed in their asset management systems across the lifecycle. So
> for example, I know that Shell has an appropriate subset of its RDL
embedded in SAP.
>
> MW: The big thing here is that this makes the interfacing much
> simpler, because the mapping - that was always the expensive and
> unreliable bit, has largely been confined to history. That is also
> where the big benefits have come from. Largely unreported, because you
> don't notice costs you didn't incur that you did not need to incur if you
did things right.
>
> MW: And yes, this is what people have been more recently calling
> master data management, we were just working out this was what was
> needed in the last century.
>
> MW: So what of IRING and other recent developments? There has
> certainly always been an ambition for seamless integration in developing
ISO 15926.
> The reality has been that so far the technology has always fallen
> short. XML Schema is OK for defining interface formats, but not
> integration (not surprising since it is really a document
> specification language). OWL has greater promise, but it is focussed
> on reasoning and so has restrictions that are at best inconvenient for
> data integration, and much of the current discussion in the ISO 15926
> community is how best to work around those limitations. IRING,
> facades, and the possible use of triple stores is currently where the
> cutting edge is. I think the IRING architecture has merit in the long
term. I'm not sure we have the technology to implement it yet.
>
> Regards
>
> Matthew West
> Information Junction
> Mobile: +44 750 3385279
> Skype: dr.matthew.west
> matthew.west@xxxxxxxxxxxxxxxxxxxxxxxxx
> http://www.informationjunction.co.uk/
> https://www.matthew-west.org.uk/
> This email originates from Information Junction Ltd. Registered in
> England and Wales No. 6632177.
> Registered office: 8 Ennismore Close, Letchworth Garden City,
> Hertfordshire,
> SG6 2SU.
>
>
>
> -----Original Message-----
> From: ontology-summit-bounces@xxxxxxxxxxxxxxxx
> [mailto:ontology-summit-bounces@xxxxxxxxxxxxxxxx] On Behalf Of
> Barkmeyer, Edward J
> Sent: 24 January 2014 22:57
> To: Ontology Summit 2014 discussion
> Subject: Re: [ontology-summit] The tools are not the problem (yet)
>
> Hans,
>
> Further comments intertwined with yours below.
>
>
> > [HT] I shudder when thinking about how bad your tooth and nail will
> > be if what is below is apparently seen as mild comments by you.
>
> [EJB] If so, then what is sacred in your view is largely irrelevant in
mine.
> I had rather thought that we had a common goal -- successful
> interchange of plant data over the lifecycle.
>
> > this is not only about knowledge engineering; this is about database
> > engineering using triple stores. (If integrating RDBs with triple
> > stores and SPARQL is your goal, you should look at the stuff
> > Kingsley Idehen is doing.) [HT] On what would YOU base any
> > knowledge, other than facts about all aspects of the plant, gathered
during decades?
> > Not
> from LOD I hope.
>
> [EJB] I would BASE the knowledge on the repositories of the facts
> about all aspects of the plant, gathered during decades. Our
> disagreement is about how we would FURTHER ENGINEER that knowledge.
>
> > What EPCs already have ...
> > What does your would-be triple store have to offer them?
> > [HT] Ignoring your patronizing last sentence this: I have worked
> > most of my life in such a large firm, I have been in the trenches, I
> > have designed the first data bases for engineering and later the
> > integration of data, resulting in such software. And so did my
> > colleagues
> from other large firms.
> > But we were faced by the fact that everybody was using something
> > different with different internal formats and geared to their
> > (different) work procedures. So when we were entering a joint
> > venture for a multibillion project we were discussing "your system or
ours?"
> > in order to be able to communicate and to satisfy the growing
> > requirements from the side of the plant owners that they wanted all
> > information in an integrated fashion. That was why PIEBASE (UK),
> > USPI
> > (Netherlands) and PoscCaesar (Norway) we formed, and later together
> > in EPISTLE (Matthew West et al). So yes, we had our systems, but
> > these were,
> in a globalizing world, silos.
>
> [EJB] Yes, and that was 10 years ago. What came of that? What
> "integrated fashion" did they all agree on and implement?
>
> > And yes, until now
> > ISO 15926 is used for peer-to-peer application interfacing,
> > succesfully as I heard.
>
> [EJB] I don't think I have seen an industry "success story" about
> 15926, even for 'peer-to-peer application interfacing'. But if that
> has been successful on a useful scale, there is no need for further
> work on anything but the scope of the reference ontology, because the
> peer-to-peer interfaces now exist. The fact is that they don't. There
are no standards for them to implement.
> (Actually, ISO 15926-11 is a pretty good standard. It provides a very
> accessible ontology for the concepts in ISO 15288 (systems engineering
> for <something>), and a clear mapping from the ontology to an RDF
> exchange form for a model population. The a posteriori Part 4/Part 2
> stuff is an Annex in the back, if anyone cares. That is the kind of
> compromise that 15926 needs more of. And I think David Price and gang
> will do something similar in Part
> 12.)
>
> > And as I started this thread: Standardization is finding a balance
> > between large ego's, commercial politics, short-term thinking,
> > hard-to-make paradigm shifts, and for the most lack of funding. And
> > I might add: the unwillingness to really understand each other
> > because that
> takes time.
>
> [EJB] Not to mention the unwillingness to compromise. "Standards is
> politics."
> What standards-making should NOT be is academic research. Except
> possibly in W3C, successful standards standardize something very close
> to what is currently in wide use, so that implementation is a marginal
> cost, and the return is wider market and lower cost of sale.
> Engineers who create new technologies seek patents, not standards.
> The lack of wide success with
> TC184/SC4 standards can largely be attributed to the creation of an
> unnecessarily high cost of implementation, which results from the
> adoption of complex mappings from concept to exchange form.
>
> > The concern is: can we develop an integrating ontology that can be
> > used for semantic mediation between the existing schemas, and
> > provide a useful exchange form based on the integrating ontology? ...
> > [HT] WE DON'T HAVE an "integrating ontology", other than the Part 2
> > data model and the templates derived from that, where the latters
> > are completely data-driven and representing the smallest possible
> > chunk of information.
>
> [EJB] Umm... Capturing the concepts needed for particular information
> sets ("data driven") is in fact how ontologies are built. It helps if
> there are also "common lower ontologies" -- quantities, time,
> location, identifiers, etc. -- that can be reused directly. The
> templates and Part 2 lend very little to the construction of
> ontologies for exchanging plant data. Those who see a value in it are
> welcome to pursue that value, but they should not impose it on others.
> As in Part 11, the template mappings can be added as an annex behind
> the problem domain ontologies and the specification of their exchange
form.
>
> > What is different is that ISO 15926 calls for explicit information,
> > where most data bases (and documents) carry implicit information,
> > making shortcuts, that is understandable for the initiated only, but
> > not for computers. Examples
> > galore: an attribute of a process boiler: "fluid category", an
> > attribute of a pressure vessel: "test fluid" and "test pressure", an
> > attribute of a centrifugal
> > pump: "impeller diameter", etc, etc. We are working on "patterns"
> > that will bridge the gap between implicit and explicit information
> representation.
>
> [EJB] Yes, what is different is that you are making an ontology, not a
> data model. But the effect is that you are trying to educate ignorant
> software engineers and plant engineers in the art of knowledge
> engineering. That is not your job, and it is the SC4 mistake. The
> requirement for the glorious standards effort is to have participating
> experts with the ability to construct good formal models in the
> standard. Failing that, it is not your job to try to produce that
> expertise by teaching the otherwise experienced domain engineers your
> trade. It is necessary to entice more people with your expertise, or
scale down the project to what you have resources to do well.
> You, and those of you who have the background, should be developing
> the ontologies from these 'available knowledge' systems, leveraging
> the available domain expertise, instead of trying to create a strict
> structure in which the neophytes will be forced to get it right. They
> won't: fools are too ingenious. And in the process, you have created
> an impediment to participation by expert
> modelers. By comparison, you and/or the participating expert knowledge
> engineers, would make a good model, and sort out the missing objects
> and the mis-assigned properties, and you won't need all the overhead
> to get that right.
>
> [EJB] When an industry group makes an OWL domain model for a small
> part of the problem space, the last thing they need is a requirement
> to figure how to use the Part 4 templates to express that model as a
> derivative of the Part 2 upper ontology. It is a waste of their time, and
it is irrelevant to their goal.
> That exercise is pure cost, with no clear return. There is value to
> having someone knowledgeable about the related ontology quality issues
> read, and recommend improvements to, their model. If you see some
> clear return on the investment of developing a template mapping to
> Part 2, then you have a motive for doing that, while they don't. And
> ultimately, their data exchange will be mapped to their model, because
> that is the model the domain experts understood. If you transmogrify
> that OWL model into a bunch of template instances, you create an added
> costly learning curve for their implementers that has no RoI for them
> or their sponsors. The people who see RoI in the gi ant triple store
> can develop the technology to transmogrify the domain ontologies and
> data for the triple store purposes, not force the domain modelers and
> the domain implementers to be concerned with it. (In lieu of tooth
> and nail, I perceive this to be a compromise
> position.)
>
> [EJB] By way of defense of my position, I would point out that after a
> mere
> 15 years of working with the god-awful STEP architecture, the
> implementers of ISO 10303 concluded that it provided nearly no
> assistance in integrating the conforming models of product data and
> processes that were made from diverse viewpoints. That model
> architecture added significant cost to the creation of the exchange
> standards themselves and even greater cost to the implementations that
> had to read the transmogrified data and convert it back to product
> information. The theory that uniform structures will produce concept
> integration was proven false in ISO 10303, and the similar theory will
prove false for ISO 15926, even though you are using RDF instead of EXPRESS.
> In making and integrating ontologies, no set of strictures is a
> substitute for the application of knowledge engineering expertise.
>
> > But their critical path also involves a viable exchange form; and a
> > clumsy form, born of obsession with triples and upper ontologies,
> > will interfere with wide adoption.
> > [HT] Wait and see.
>
> [EJB] Quo usque tandem? There is no profit in saying 15 years later "I
> told you so".
>
> -Ed
>
> P.S. I chose to burden the Forum with this email only because I worry
> that other well-meaning standards bodies might follow TC184/SC4's
> model for the use of ontologies in standards, to their own detriment.
> (And yeah, that was last year's issue.)
>
> --
> Edward J. Barkmeyer Email: edbark@xxxxxxxx
> National Institute of Standards & Technology Systems Integration Division
> 100 Bureau Drive, Stop 8263 Work: +1 301-975-3528
> Gaithersburg, MD 20899-8263 Mobile: +1 240-672-5800
>
> "The opinions expressed above do not reflect consensus of NIST, and
> have not been reviewed by any Government authority."
>
>
>
>
> __________________________________________________________
> _______
> Msg Archives: http://ontolog.cim3.net/forum/ontology-summit/
> Subscribe/Config: http://ontolog.cim3.net/mailman/listinfo/ontology-
> summit/
>
> Unsubscribe: mailto:ontology-summit-leave@xxxxxxxxxxxxxxxx
> Community Files: http://ontolog.cim3.net/file/work/OntologySummit2014/
> Community Wiki: http://ontolog.cim3.net/cgi-
> bin/wiki.pl?OntologySummit2014
> Community Portal: http://ontolog.cim3.net/wiki/
>
>
> __________________________________________________________
> _______
> Msg Archives: http://ontolog.cim3.net/forum/ontology-summit/
> Subscribe/Config: http://ontolog.cim3.net/mailman/listinfo/ontology-
> summit/
> Unsubscribe: mailto:ontology-summit-leave@xxxxxxxxxxxxxxxx
> Community Files: http://ontolog.cim3.net/file/work/OntologySummit2014/
> Community Wiki: http://ontolog.cim3.net/cgi-
> bin/wiki.pl?OntologySummit2014
> Community Portal: http://ontolog.cim3.net/wiki/ (018)
_________________________________________________________________
Msg Archives: http://ontolog.cim3.net/forum/ontology-summit/
Subscribe/Config: http://ontolog.cim3.net/mailman/listinfo/ontology-summit/
Unsubscribe: mailto:ontology-summit-leave@xxxxxxxxxxxxxxxx
Community Files: http://ontolog.cim3.net/file/work/OntologySummit2014/
Community Wiki: http://ontolog.cim3.net/cgi-bin/wiki.pl?OntologySummit2014
Community Portal: http://ontolog.cim3.net/wiki/ (019)
_________________________________________________________________
Msg Archives: http://ontolog.cim3.net/forum/ontology-summit/
Subscribe/Config: http://ontolog.cim3.net/mailman/listinfo/ontology-summit/
Unsubscribe: mailto:ontology-summit-leave@xxxxxxxxxxxxxxxx
Community Files: http://ontolog.cim3.net/file/work/OntologySummit2014/
Community Wiki: http://ontolog.cim3.net/cgi-bin/wiki.pl?OntologySummit2014
Community Portal: http://ontolog.cim3.net/wiki/ (020)
|